Trouble
indication
Trouble
Indicator Digit
Possible Causes Trouble Possible Solution
together
Red and
Yellow LEDs
flashing
together
N/A
Initialization
Sequence
l The unit is still initializing please wait while the unit gets its
programming and establishes a connection to all programmed
receivers.
NOTE: This process may take several minutes to complete.
Only Green
LEDs
flashing
N/A
Hardware Default
Jumper
l The hardware default jumper is installed and mustbe removed. See
Figure 3.
Green LEDs
alternating
N/A
Radio Reset or
Radio Initialization
l If this status persistsand the yellow LED shows5 flashes, confirm that
the SIM card is active.
15
To Next Page
Loading...
