DTS INSIGHT FR830 - Page 51

50
(1) When selecting the original format
Each option byte register name and setting value are saved with ASCII string on every line.
Register name and setting value (hexadecimal)
Output example:
OPBT0 0x7F9FFFCF
OPBT1 0xFFFFC9F8
OPBT2 0xBFFFFFFC
OPBT3 0x7FFFFFFF
Above option byte register names and setting values will be output as follows.
(2) When selecting S record format
Output is the same as in the YDD file format.
Address ：Fixed to #00000040
Size ：Fixed to 32 byte
Data ：Option byte set value
Output example:
OPBT0 0x7F9FFFCF
OPBT1 0xFFFFC9F8
OPBT2 0xBFFFFFFC
OPBT3 0x7FFFFFFF
Above option byte register names and setting values will be output as follows.
OPBT0 0x7F9FFFCF
OPBT1 0xFFFFC9F8
OPBT2 0xBFFFFFFC
OPBT3 0x7FFFFFFF
OPBT4 0xFFFFFFFF
OPBT5 0xFFFFFFFF
OPBT6 0xFFFFFFFF
OPBT7 0xFFFFFFFF
S32500000040CFFF9F7FF8C9FFFFFCFFFFBFFFFFFF7FFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFCA