DTS INSIGHT FR830 - 2 Specifications; Target Microcomputer and Specifications

5
2 Specifications
2.1 Target Microcomputer and Specifications
For any items that are not specifically noted here, the standard specifications of NETIMPRESS
are applied.
Model name FR830
Target Microcomputer Defined by Micom Packs FR830Mxx
Code Flash Memory Capacity Same as above.*1
User Boot Area Capacity Same as above.*1
Data Flash Capacity Same as above.*1
Code Flash Memory Address Same as above.*1
User Boot Area Address Same as above.*1
Data Flash Address Same as above.*1
Object File Format
Intel HEX
Motorola S
Binary
Default Motorola S
Target Interface
UART (asynchronous communication) interface
(one-wire/two-wire)
2400/4800/9600/19200/31250/
38400/62500/76800/10400/
115200/125000/153600/230400/
250000/307200/460800/500000/
614400/1000000/2000000 bps
□ MBS first ■ LSB first
CSI (synchronous communication) interface
62.5K/125K/250K/500K/850K
1.25M/2.5M/3.3M/5Mbps
■MBS first □ LSB first
Default CSI 5Mbps
Verify Mode
■ Full Verify ■ SUM Verify
Default SUM Verify
MCU Clock during programming Defined by Micom Packs FR830Mxx
Voltage of target interface during
programming
Same as above
For details of the target microcomputer, please refer to the instruction manual of the relevant
Micom Pack.