Typical Application.
The DTS600/800 (max. 2500mm travel) model can automate sectional and tilting overhead garage doors up to a height of
2600mm.
Manual Disengagement.
The DTS600/800 is equipped with a manual release cord to disengage the shuttle and move the door by hand while holding the
handle down (Fig. 8). To operate, pull on the handle to disengage the shuttle. To re-engage the door, simple run the operator
in automatic mode or move door by hand until the trolley engages in the shuttle.
For situations where a pedestrian door is not present it is recommended that an external disengagement device is fitted. (Fig. 9).
Important Information for the User.
Once the DTS600/800 operator has been installed, the user must be informed about how it works and all the risks that can arise
if it is used improperly. The user must avoid placing himself/herself in dangerous situations such as standing within the door’s
operating range when it is moving.
Do not let children play near the door and keep the remote controls out of their reach.
All servicing, repairs or checks must be carried out by professionally qualified personnel and noted on a maintenance register
kept by the user.
IMPORTANT: In the case of a malfunction, the user must call an authorized installer.
To Next Page
Loading...
Need help?
General
