DTS Scena LED 150 User Manual

11
Up-Down
MENU
ENTERUp-Down
Up-DownENTER
Up-DownENTER
ENTER
ENTER
ENTER
ENTER
Up-Down
11- DISPLAY FUNCTIONS
DISPLAY FUNCTIONS
The SCENA LED 150 display panel shows all the available functions . Using these
functions, it is possible to change some of the parameters and add some functions.
Changing the D.T.S. setting can vary the functions of the unit so that it does not
respond to the DMX 512 used to control it. Carefully follow the instructions below
before carrying out any variations or selections.
NOTE: the symbol shows which key has to be pushed to obtain the desired
function.
Software version 1.13
REVERSE DISPLAY
Reverses display's reading depending on
the mounting position (on the ground or
suspended).
DISPLAY STAND BY
To turn off the display (after 5 seconds)
Or leave it always on.
DMX MODE
To select DMX mode : 4 DMX channels mode
(default) or Manual mode.
Manual mode can also be activated by pressing at
the same time the “UP’’ + ”DOWN” buttons on
unit display for 3 seconds (“A001”).
Up-Down
MENU
ENTER
Up-Down
ENTER
ENTER
Up-Down
ENTER
Suspended
Position
Floor
Position
Display
Off
Display
Always on
Default DMX Mode
4 Channels
Manual Mode

DTS Scena LED 150 Specifications

General

Brand	DTS
Model	Scena LED 150
Category	Lighting Equipment
Language	English