To Next PageTo Next PageWhat to do if Dual Car Receiver has audio but no video?
If your Dual Car Receiver has audio but no video, the parking brake safety circuit might not be connected, or the parking brake isn't applied. Check the connections at the parking brake.
What to do if there is no video display when in reverse on Dual Car Video System?
If you are not getting a video display when in reverse on your Dual Car Video System, it could be because the reverse circuit is not connected. Check the connections at the reverse lamp. Also, make sure the vehicle is actually in reverse gear.
Why is there no sound coming from my Dual XDVD110BT?
If your Dual Car Video System has power but no sound, it could be due to the speaker wires not being connected. Check the connections at the speakers. It could also be that one or more speaker wires are touching each other or the chassis ground. Ensure all bare speaker wires are insulated from each other and the chassis ground.
How to fix Dual Car Video System that will not turn on?
If your Dual Car Video System unit won't turn on, it could be due to several reasons: * The yellow wire may not be connected properly or may have incorrect voltage. Ensure that the connection has the correct voltage (11~16VDC). * The red wire may not be connected properly or may have incorrect voltage. Ensure that the connection has the correct voltage (11~16VDC). * The black wire may not be properly connected. Ensure that the connection is grounded. * A fuse may have blown. Replace the fuse(s).
Why does my Dual XDVD110BT Car Video System keep blowing fuses?
If your Dual Car Video System unit keeps blowing fuses, it could be due to: * The yellow or red wire touching the chassis ground. Inspect the wires for any pinching. * The speaker wires touching the chassis ground. Inspect the wires for any pinching. * Incorrect fuse rating. Make sure you are using fuses with the correct rating.
Why won't my Dual Car Video System play DVDs?
If your Dual Car Video System DVD does not start playback, check the disc for scratches or other physical defects. Also, make sure that you only use discs labeled "Region 1" or "All".
Why does "Wrong Region" appear on my Dual Car Receiver display?
If "Wrong Region" appears on the display of your Dual Car Receiver, it indicates a region code error. Use discs labeled "Region 1" or "All" only.
Why is there no video display when reversing with my Dual Car Receiver?
If you're not seeing a video display when reversing with your Dual Car Receiver, it could be that the reverse circuit isn't connected or the vehicle isn't actually in reverse. Check the connections at the reverse lamp and make sure the car is in reverse gear.
Why does my Dual Car Receiver keep blowing fuses?
If your Dual Car Receiver is blowing fuses, there are a few potential causes. The yellow or red wire may be touching the chassis ground; check for any pinched wires. Similarly, speaker wires touching the chassis ground can also cause this issue, so inspect for pinched wires there as well. Finally, ensure that you are using fuses with the correct rating for your unit.
Why Dual Car Receiver won't turn on?
Your Dual Car Receiver might not be turning on due to several reasons. First, the yellow or red wire might not be connected properly, or the voltage could be incorrect (it should be between 11 and 16VDC); check these connections. Second, the black wire might not be properly connected to ground; verify this connection. Finally, the fuse might be blown; if so, replace it.
General| Bluetooth | Yes |
|---|---|
| USB Port | Yes |
| DVD Player | Yes |
| SD Card Input | Yes |
| Steering Wheel Control Compatible | Yes |
| Pre-amp Outputs | Yes |
| Peak Output | 50 Watts |
| AUX Input | Yes |
| AM/FM Tuner | Yes |
| Touchscreen | Yes |
| Rear View Camera Input | Yes |
| Resolution | 800 x 480 |
| Audio Output | 4 x 50 Watts |
| Video Playback Formats | DVD |
