To Next PageTo Next PageWhy does my Dual Car Video System have power but no sound?
If your Dual Car Video System has power but no sound, here are a couple of things to check: * Speaker wires may not be connected. Ensure all speaker wires are properly connected at the speakers. * One or more speaker wires might be touching each other or the chassis ground. Insulate all bare speaker wires from each other and from the chassis ground.
What to do if my Dual XDVD256BT won't turn on?
If your Dual Car Video System is not turning on, there are several possible causes: * The yellow or red wire may not be connected, or the voltage may be incorrect. Check the connections to ensure they are properly connected and have the correct voltage (11~16VDC). * The black wire may not be connected. Verify the connection to the ground. * The fuse may be blown. Replace the fuse(s) with a new one.
What to do if my Dual Car Video System keeps blowing fuses?
If your Dual Car Video System is blowing fuses, consider these potential issues: * The yellow or red wire may be touching the chassis ground. Check for any pinched wires. * Speaker wires may be touching the chassis ground. Inspect for pinched wires. * The fuse rating may be incorrect. Use fuses with the correct rating.
Why does my Dual XDVD256BT have audio but no video?
If your Dual Car Video System has audio but no video, it might be due to: * The parking brake safety circuit not being connected or the parking brake not being applied. Check the connections at the parking brake and apply the parking brake.
What to do if my Dual Car Video System shows no video display when in reverse?
If there's no video display on your Dual Car Video System when in reverse, it could be: * The reverse circuit isn't connected, or the vehicle isn't in reverse. Check the connections at the reverse lamp and make sure the vehicle is in reverse gear.
Why does my Dual XDVD256BT DVD not start playback?
If your Dual Car Video System DVD does not start playback, it could be due to: * A physical defect in the media or the wrong region. Check the disc for scratches and use discs labeled "Region 1" or "All" only.
How to fix a Dual XDVD256BT Car Video System IR remote that does not work?
If the IR remote for your Dual Car Video System is not working, the most likely cause is a dead battery. Replace the battery.
Why does my Dual Car Video System have excessive skipping?
If your Dual Car Video System is skipping excessively, there are a couple of potential reasons: * The unit may not be mounted correctly. Check the mounting sleeve. * There may be a physical defect in the media. Inspect the disc for scratches.
What does 'Disc Region Incorrect' mean on my Dual XDVD256BT?
If your Dual Car Video System displays 'Disc Region Incorrect', it means there is a region code error. Use discs labeled "Region 1" or "All" only.
General| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| DVD Player | Yes |
| AM/FM Tuner | Yes |
| Rear Camera Input | Yes |
| Steering Wheel Control Compatible | Yes |
| AUX Input | Yes |
| AM/FM Radio | Yes |
| Touchscreen | Yes |
| Remote Control | Yes |
| Audio Output Power | 50 Watts x 4 Channels |
| Video Playback Formats | MP4 |
Driver distraction warnings related to unit operation and installation.
Precautions for preventing damage or injury during installation and operation.
Visual representation of unit's input/output connections.
Configuration options for beep, disc, radio, Bluetooth, wallpaper, and about.
Further setup options for time, video settings, language, SWC, reset, and audio.
Steps for pairing a Bluetooth device with the unit.
Common problems, their causes, and recommended solutions.
