What to do if my Dual Receiver has power but no sound?
If your Dual Receiver unit has power but you're not getting any sound, start by checking the speaker wire connections. Ensure they are securely connected to the speakers. Also, inspect the speaker wires to make sure none of the bare wires are touching each other or the chassis ground. If you find any, insulate them to prevent contact.
How to fix a Dual Receiver that will not turn on?
If your Dual Receiver unit won't turn on, begin by checking the yellow and red wires to ensure they are properly connected and receiving the correct voltage. Also, check the black wire and make sure it's connected to the ground. If those connections are good, inspect the fuse and replace it if it's blown.
Why does my Dual Receiver keep blowing fuses?
If your Dual Receiver keeps blowing fuses, there could be a few reasons. First, check the yellow or red wire to see if it's touching the chassis ground. Also, check the speaker wires to ensure they are not touching the chassis ground. A pinched wire could be the cause, so inspect them carefully. Finally, make sure you are using a fuse with the correct rating; using the incorrect rating can cause fuses to blow.
General| Internet radio | - |
|---|---|
| Supported radio bands | AM, FM |
| Preset stations quantity | 30 |
| Product color | Black |
| Wi-Fi | No |
| Ethernet LAN (RJ-45) ports | 0 |
Steps and advice for preparing the unit before installation.
Crucial initial steps and warnings before beginning installation.
Step-by-step instructions for the initial installation process.
Visual representation of the unit's electrical connections and wire functions.
Identifies and explains all external controls and buttons on the receiver unit.
Identifies and explains all buttons on the remote transmitter.
Covers faceplate removal, power, mode selection, display, reset, clock, and volume.
Controls for Bass, Treble, Balance, Fader, and Loudness settings.
Settings for tuner mode, beep, area selection, and clock format.
Covers tuning, band selection, storing, recalling, and scanning station presets.
Instructions for connecting, inserting, and controlling playback from USB/SD media.
Details on compatible file types, playback order, capacity, and device requirements.
Explains how file name, song title, artist, and album info are displayed.
Details on warranty period, what is covered/not covered, and how to make a claim.
Steps to take before calling for service and how to package for return.
Addresses issues like no power, no sound, blown fuses, and display errors.
Lists FM/AM tuner ranges, sensitivity, and general output/dimension details.
States compliance with FCC rules and guidelines for interference.
To Next Page
