EasyManua.ls Logo

Ducati monster 620 i.e. - Page 46

Ducati monster 620 i.e.
546 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Caratteristiche tecniche
Technical specification
sezione / section
C 2
16
A
B
C
D
E
F
G
H
L
M
N
P
Monster 400 - 620 Aggiornamento/Update - M.Y. 2006 - edizione/edition 00
40
–10
14
Uni
grade
Multi
grade
0
32
10
50
20
68
30
86
40 C
104
F
20W–40 20W–50
15W–40 15W–50
10W–40
10W–30
10W
20W
20
30
2 - FUELS AND LUBRICANTS
Caution
Do not use fuel or lubricant additives.
Fuels Type cu. dm (liters)
Fuel tank, including a 3 cu. dm (litres) reserve Lead-free fuel with at least 95 - 98 RON at
origin
14 (620 - 620 Dark)
15 (400 - 400 Dark)
Engine sump and oil filter SHELL Advance Ultra 4 3,1
Clutch and front/rear brake circuits SHELL Advance Brake Dot 4
Protection for electrical contacts SHELL Advance Contact Cleaner
Front fork (each leg) SHELL Advance Fork 7.5 or DONAX TA 0.400 (per leg)
Engine oil
A good engine oil has special
properties. Use only a highly
detergent engine oil with certified SE,
SF or SG, or even higher, service
ratings.
Oil viscosity
SAE 10W-40
The other viscosity grades specified
in the table can be used where the
average ambient temperatures are
within the limits shown.
2 - RIFORNIMENTI E LUBRIFICANTI
Importante
Non è ammesso l’uso di additivi nel carburante o nei lubrificanti
Rifornimenti Tipo dm³ (litri)
Serbatoio carburante, compresa una riserva di
3 dm
3
(litri)
Benzina verde con un numero di ottani
all’origine di almeno 95 - 98 RON
14 (620 - 620 Dark)
15 (400 - 400 Dark)
Coppa motore e filtro SHELL Advance Ultra 4 3,1
Circuito freni ant./post. e frizione SHELL Advance Brake Dot 4
Protettivo per contatti elettrici SHELL Advance Contact Cleaner
Forcella anteriore SHELL Advance Fork 7,5 o DONAX TA 0,400 (per stelo)
Olio motore
Un buon olio motore ha delle
particolari qualità. Fare uso solamente
di olio motore altamente detergente,
certificato sul contenitore come
corrispondente, o superiore, alle
necessità di servizio SE, SF o SG.
Viscosità
SAE 10W-40
Le altre viscosità indicate in
tabella possono essere usate se
la temperatura media della zona di
uso della motocicletta si trova nei
limiti della gamma indicata.

Table of Contents

Related product manuals