E
90
Remove the fuse cap (A, fig. 78) to expose the fuse.
A blown fuse is identified by the interrupted inner filament
(5, fig. 79).
Importante
Switch the ignition key to OFF before replacing a
fuse to avoid possible short circuits.
Warning
Never use a fuse with a rating other than specified.
Failure to observe this rule may damage the electric
system or even lead to fire.
A 2
fig. 78
5 5
IN GOOD CONDITION
INTEGRO
BLOWN
QUEMADO
fig. 79
DUCum_1000DS####03_###e.book Page 90 Wednesday, March 12, 2003 4:33 PM
ProCarManuals.com
To Next Page
Loading...
