21
• Pressing the selected RACK button and then the
CANCEL button within 3 seconds will “zero” the
Timer at any time.
• The alarm will sound at the end of the cooking cycle.
Pressing the CANCEL or selected RACK button
will cancel it.
Timed Shelf Cooking
A cooking cycle where the product to be cooked is placed in
the oven one pan or shelf at a time can be initiated as
follows:
• Turn Power Switch to COOK position.
• Set the desired temperature using the TEMP dial.
• Select the desired fan speed using the COOK HI/LO
FAN button.
• Select the fan to be on continuously or cycled using
the FAN CON/CYC button.
• Place pan on first shelf.
• Set the desired time using the TIME dial or selecting
one of the preset TIMER buttons.
• Press the RACK 1 button to start the cooking cycle.
The timer will begin to count down and the RACK 1
indicator will begin flashing.
• Pressing the selected RACK button and then
CANCEL button within 3 seconds will “zero” the
Timer at any time.
• Place the next pan on second shelf.
• Set the desired time using the TIME dial or selecting
one of the preset TIMER buttons.
• Press the RACK 2 button. The RACK 2 indicator
will light. The Time will resume counting down.
The procedure of placing a pan on a shelf, selecting the
desired time, and pressing the corresponding RACK button
can be repeated for a total of 5 Shelf/Rack combinations.
• When RACK 1 reaches “zero”, the alarm will
sound and “-1-” will be flashing in the display.
Pressing CANCEL or RACK 1 button will
cancel it.
• After the alarm is cancelled, the Timer will display
the remainder of the countdown for the RACK with
the least amount of time left and its indicator will
begin flashing.
This will be repeated until all of the RACK Timers reach
“zero”.
To Next Page
Loading...
