Duke TSC-6/18M - Page 23

23
Installation and Operation of: DUKE TSC Proofer Oven with Touch Screen Controls
FILES FILE MANAGEMENT
1. Touch the button and then enter pin code
3 4 5 6 and Touch the button when
prompted.
2. Insert USB drive with the le, until seated, into the
USB Host Device.
3. Select le operation from list and follow
instruction on the display screen.
Figure: Inserting USB Drive Into USB Host Device
Figure: File Management Screen
CONFIG CONFIGURATIONS
1. Touch the button and then enter pin code
2 3 4 5 and Touch the button when
prompted.
2. Touch the button for the setting you want to edit.
• DATE/TIME – Touching will display DATE/
TIME edit screen. Touch the
or button
adjacent to the eld you want to change. Touch
the button to save the changes.
• LANGUAGE – Touching will display a list of
included languages. Touch the preferred
language button to select.
• C/F SELECT – Touching will toggle between
CENTIGRADE MODE ENABLED and FAHRENHEIT
MODE ENABLED.
• DEFAULT RECIPE – Touching will reload factory
defaults.
• SYSTEM STATUS – Touching will display Proofer
Oven status.
Figure: Congurations Screen
PROGRAMMING CONTROLS  continued