Dungs MPA 41 PF Series User Manual

11 … 96
10 … 96
Display modes
Operation display
• Display of the current
operating state
• Display of the program state
• Display of bus address
Info display
• Display of ame quality
• Display of resettable counters for
start-up, operating hours and switch-
ing cycles
Error display
Display of the error memory
• Automatic activation of
error messages
• Additional information about faults
• Query of the ten last errors
Parameterisation display
• Password-protected functional lev-
els for service and OEM parameter
settings
• Setting important parameters such
as: Pre-venting time
Safety time for start-up
Post-venting time
Behaviour after ame
failure
Accessories
UV 41 (HE)
UV ame detector for high mechani-
cal load; metallic version. Suitable for
intermittent operation.
Communication
MPA 41xx extension module EM2/4
Additional circuit board and connector
set for Probus DP and Modbus com-
munication.
Parameter setting and service
MPA 41xx parameterisation and
service box
Universal support for device checking in
the eld; for producing small and medium
series.
MPA Vision Box
As addition to MPA41xx parameterisa-
tion and service box for setting param-
eters via a PC/laptop.
The program sequence and times can
be modied on the mounted display to
match each application.
A laptop or PC is not required for the
modication.
The automatic systems are protected by
passwords against unauthorised access.
All settings for the MPA 41xx PF auto-
matic burner control system can also be
made by means of a laptop/PC via MPA
Vision Box.
Printed in Germany • Edition 04.18 • Nr. 271 958

Dungs MPA 41 PF Series Specifications

General

Brand	Dungs
Model	MPA 41 PF Series
Category	Control Systems
Language	English