53 … 96
Printed in Germany • Edition 04.18 • Nr. 271 958
Error display
▶
An error message is automatically displayed as soon as the automatic system goes to the fault lock
position.
▶ The last occurred error is displayed.
▶
F1 to F9 are also displayed in standby and operation. F5 to F9 can be acknowledged by pressing
simultaneously.
Error display
As long as the plus button is kept
pressed,
the state number is displayed
As long as the minus key is kept pressed,
the addition error message
(additional byte 1) is displayed
Automatic activation
if a fault is active
As long as the back key is kept pressed,
the current bus address or OFF is displayed
Unlocking
As long as the plus and minus keys are
kept pressed together,
the additional error message
(additional byte 4) is displayed
To Next Page
Loading...
Need help?
General