Dungs MPA 41 PF Series User Manual

47 … 96
46 … 96
Printed in Germany • Edition 04.18 • Nr. 271 958
Overview of the display modes
Mode
Operation display
Error display
Info display
Display of the error memory
Parameterisation display
Reset display
Flashing display
Active
in normal operation if no error is active.
if the automatic system is in fault lock.
From operation display by pressing a shortcut
and
From operation display by pressing a shortcut
From operation display by pressing a shortcut
From operation display by pressing a shortcut
Depending on the display mode:
1. Request to con rm the access level change
2. Keep the unlock key depressed for more than 5 s to restart the MPA ("Extend-
ed unlocking")
3. Processor 2 error, see error list
4. New password after password change
5. Restart of the automatic system, all segments and LEDs are  ashing
and
and
and

Dungs MPA 41 PF Series Specifications

General

Brand	Dungs
Model	MPA 41 PF Series
Category	Control Systems
Language	English