60 / 125
0006081263_200705
Display in operating mode
Gas ring, pneumatic modulation
Move servo drive for air to character-istic
point P9. Idle-position check of air-pres-
sure monitor.
If "2" remains on display, it means that
the air-pressure monitor is not in idle
position.
Fan motor insertion. Air-pressure monitor
not yet closed.
Purging time countdown in seconds.
While pre-venting is in progress, servo
drive for gas goes to ignition point P0
Purging time countdown in seconds.
Purging time countdown in seconds.
To Next Page
Loading...
