Dupla pH-Control Pro - Ph Alarm; Deactivation;Activation of the Audible Ph Alarm

12
5.2.3 pH alarm programming
pH
pH
pH
When a flashing is acknowledged with , or your last programmed value flashes.
Use the ▲ or ▼ button to set the +/- alarm between pH 0.1 and 4.0.
Acknowledge with
Please note: means that no alarm is set.
When the pH Alarm programming is finished,
flashes.
5.2.4 Deactivation/activation of the audible pH alarm
pH
pH
pH
When flashes, press to (de)activate the audible alarm.
When
flashes acknowledge with to deactivate the pH alarm.
Alternatively use the ▲ or ▼ button until
flashes and acknowledge with to activate the pH alarm.
Hint: The audible alarm for pH and calibration reminder can not be separated. If you deactivate the audible pH
alarm the audible calibration reminder alarm is deactivated as well.