11
Turn ON the power switch.
• Pressing "I" turns ON the power supply.
Pressing "O" turns OFF the power supply.
When the downstream unit is connected, turning
ON the power switch of the DFC-12/10 will auto-
matically turn ON the power of the downstream unit
as well by the remote function. Be sure to wait for
more than 10 seconds when switching ON again
after having switched OFF.
1
2
WARNING
Do not touch the power
switch with wet hands.
Otherwise electric hazards may
occur.
Set the paper feed pressure adjusting
knob to the paper size.
Note As a paper feed pressure adjusting
knob is provided for each bin, adjust
each knob to the paper size.
• If the paper size is less than A3, set the knob to
the right position (normal).
• If the paper size is more than A3, set the knob to
the left position (strong).
3
Adjust the paper separation pressure
adjusting lever to the paper thickness.
Note As a separator pressure adjusting le-
ver is provided for each bin, adjust each
lever to the paper thickness.
• When using thick paper, move the lever to the
left (where the pressure is low).
• When using normal paper, move the lever to the
center.
• When using thin paper, move the lever to the
right (where the pressure is high).
9. OPERATIONS
OFF
Interruptor de alimentación
ON
Strong
Normal
Paper feed pressure adjusting knob
L
o
w
H
ig
h
Paper separation pressure
adjusting lever
To Next Page
Loading...
Need help?
General
