Need help?Do you have a question about the Duplo DC-10 mini and is the answer not in the manual?
General| Brand | Duplo |
|---|---|
| Model | DC-10 mini |
| Category | Printer Accessories |
| Language | English |
Explains the meaning of various safety symbols used in the manual and on the unit.
Guidelines for safely installing the unit on a stable surface, considering environment and weight.
Lists and illustrates all parts included with the DC-10 mini collator.
Step-by-step instructions for attaching the jogger unit, paper receiving table, and auxiliary feed table.
Instructions on how to properly loosen, stack, and flatten paper on the feed table for optimal performance.
How paper orientation differs for various paper sizes like A3SR, A5, etc.
Explains two methods for stacking paper (face up/down) for use in the NORMAL mode.
Instructions on dividing paper into piles for odd/even feed tables in ALTERNATIVE mode.
How to stack interleaves on the last used table in INTERLEAVING mode.
Outlines initial setting operations and operations after initial settings have been changed.
Explains how to use the PRESET key to check paper tables and record paper thickness.
Describes the OFFSET mode for set stacking and STRAIGHT mode for pile stacking.
Details the SINGLE, ALTERNATIVE, and INTERLEAVING modes of operation.
Explains the location, functions, and settings of the dip switches inside the unit.
Covers GREEN ON, GREEN BLINKING, RED ON, RED BLINKING, and QUICK RED BLINKING states of the paper feed table error lamp.
Explains causes and corrections for CARRIER COVER, PAPER FULL, and PERIPHERALS lamps (ON/BLINKING).
Instructions for clearing paper jams at the feed ring and ejection gate.
Addresses unit startup problems, paper jam errors during feeding, and frequent no-feeding/multi-feeding.
Explains troubleshooting for E-1, E-2, and E-5 error codes displayed on the NO. OF SETS window.
To Next Page
