Duplo DC-10 mini User Manual

19
6. OPERATING PROCEDURES
<Tower A Initial Setting Operations>
Preset
<Operations when initial
settings have been changed>
Select the collating speed
Preset
Set the mode (NORMAL,
ALTERNATIVE, or
INTERLEAVING)
Start
Select the add or subtract
function
Start
ON
Select the OFFSET/
STRAIGHT mode
Adjust the paper
receiving stopper
Adjust the jogger
Turn on the power Turn on the power
Adjust the paper feed pressure
Adjust the paper separator
pressure
Adjust the paper feed pressure
Adjust the paper separator
pressure
Stack the paper
Stack the paper
• Adjust the paper
receiving stopper
• Adjust the jogger
6-1. PROCEDURES FOR USING THE UNIT
Turn off/on the
peripherals
Order
2 ----------------------------------------
3 ----------------------------------------
4 ----------------------------------------
5 ----------------------------------------
6 ------------------------ Initial
Settings
7 -- Peripherals “OFF”
8 -- OFFSET/
STRAIGHT
Mode ------------ “OFFSET”
9 ----------------------------------------
10 --------------------------------------
11 Collating
Speed ---------- “Slow”
12 --------------------------------------
13 NORMAL, ALTERNATIVE,
INTERLEAVING Modes
--------------------- “NORMAL
Mode”
14 Add/ Subtract
Function ------- “Add”
15 --------------------------------------

Duplo DC-10 mini Specifications

General

Brand	Duplo
Model	DC-10 mini
Category	Printer Accessories
Language	English