18
5. PRECAUTIONS BEFORE USE
5-4. STACKING PAPER FOR THE ALTERNATIVE MODE
• Divide paper of the same page into two piles and
stack them on odd and even paper feed tables
(tables 1 and 2, table 3 and 4, tables 5 and 6, tables
7 and 8, tables 9 and 10).
• The paper will be fed from either table of each pair
(from the odd or even table).
Normally, the paper will be fed from the odd
table, and when it runs out of paper, paper will be
fed from the even table.
• The process hereafter is the same as in ''5-3.
Stacking Paper for the NORMAL Mode" on page
17.
When the paper is placed with its printed face up.
When the paper is placed with its printed face down.
Note
When using peripherals, decide whether to place the
paper with its printed face up or down according to the
specifications of these devices.
• Stack the interleaves on the last table used.
For example, if the first seven tables from the top
are to be used, stack these interleaves on the
seventh table. (See figure on the right.)
• The process hereafter is the same as in ''5-3.
Stacking Paper for the NORMAL Mode" on page
17.
5-5. STACKING PAPER FOR THE INTERLEAVING MODE
Printed face up.
Printed face down.
To Next Page
Loading...
Need help?
General
