Duplo DC-10 mini User Manual

33
7. WHAT TO DO WHEN...
7-6. WHEN THE CARRIER COVER OPEN LAMP LIGHTS UP
Cause
• When the carrier cover is not closed properly.
Correction
• Close the door properly. The lamp will go off.
• If the unit stops during operations, press the
EJECT key and eject the paper inside.
Press the START/STOP key to start operations.
7-7. WHEN THE PAPER FULL LAMP
LIGHTS UP
Cause
• When the paper receiving table is full.
Correction
• Remove the paper on the paper receiving table.
• Press the START/STOP key. The error lamp will
go off and operations will start again.
7-8. WHEN THE PERIPHERALS LAMP
LIGHTS UP
Cause
• When an error occurs in the downstream
processing device.
Correction
• Check the cause and correct it.
• Press the START/STOP key. The error lamp will
go off and operations will start again.
For details of errors which occur in these devices,
refer to their instruction manuals.
7-9. WHEN THE PERIPHERALS LAMP
BLINKS
Cause
• When paper has jammed at the gate of the
peripherals.
Correction
• Remove the paper at the gate.
• Press the START/STOP key. The error lamp will
go off and operations will start again.

Duplo DC-10 mini Specifications

General

Brand	Duplo
Model	DC-10 mini
Category	Printer Accessories
Language	English