What to do if E001 is displayed on Duplo Duprinter DP-43E?
If error code E001 appears on your Duplo Printer, check the encoder sensor position. If the sensor position is OK, the cause might be a faulty Main PCB Unit, which should be replaced. You can also remove the interference or the cause. Check the bundled wire and connector; if they are OK, replace the main PCB. You can also follow the procedure (5) or finish.
How to fix E003 error on Duplo Printer?
To address error E003 on your Duplo Printer, start by removing any jammed master. Then, check the bundled wire and connector; if they appear to be in working order, replace the main PCB. Other possible solutions include following procedure (5), replacing the cutter motor, or addressing the regulated power supply.
What to do if Duplo Printer displays E002?
When your Duplo Printer shows error E002, first, remove the cause of defective operation, such as leaning or catching. If the elevator top limit sensor is defective, follow procedure (6). If the problem persists, consider replacing the regulated power supply, the elevator, the elevator motor, the main PCB Unit, or the elevator top limit sensor. If the Elevator bottom limit switch is the cause, replace the elevator bottom limit SW.
How do I fix E006 error on my Duplo Duprinter DP-43E?
To resolve the E006 error on your Duplo Printer, first try following procedure (5). If that doesn't work, check the bundled wire; if it's OK, replace the contact pressure motor. You can also try replacing the regulated power supply or the main PCB. Alternatively, you can finish.
What should I do if my Duplo Duprinter DP-43E shows E008?
If your Duplo Printer displays E008, you can try to finish, or replace the Main PCB Unit.
Explains the manual's structure, content, and how to use it effectively.
Covers general safety warnings, installation cautions, and maintenance guidelines.
Details key features, technical specifications, and physical dimensions of the Duprinter models.
Explains internal workings, master, ink, system setup, and part names of the Duprinter.
Covers printing procedures, optional equipment, error messages, and corrective actions.
Explains the operation and sequence of the scanner unit, including document handling.
Details the operations of platemaking, master feeding, and ejection mechanisms.
Covers the operations of paper feed, drum driving, and press sections.
Explains operations of paper ejection and drum unit functions, including ink control.
Details removal of external parts and scanner section components.
Explains removal of components in platemaking, master feed, ejection, and paper feed systems.
Covers removal of parts from drum driving, paper ejection, and drum sections.
Covers adjustments for scanner wiring, slider positions, and platemaking processes.
Details adjustments for paper feed, drum driving, and press mechanisms.
Outlines adjustments for paper ejection, ink amount, and master clump.
Covers adjustments for electrical components, printing speed, and optional equipment.
Provides comprehensive safety precautions, unpacking, assembly, and initial setup for the Duprinter.
Details the installation of the drum unit and the keycard counter 3, including ink supply.
Provides instructions for installing and setting the A4 drum for use.
Offers guidance for diagnosing and resolving defective images and operational issues.
Lists error codes, their causes, and detection timings for troubleshooting.
Provides a list and classification of available HELP modes, covering ROM versions and basic functions.
Explains how to access and use specific HELP modes, with detailed procedures for various functions.
Provides layout and function of electrical parts like switches, sensors, motors, PCBs, and connectors.
Presents overall wiring diagrams and sequence definition charts for different model types.
Shows detailed wiring layouts specific to E type and S type models.
General| Type | Digital Duplicator |
|---|---|
| Resolution | 600 x 600 dpi |
| Paper Weight | 46 - 210 g/m² |
| Paper Size | A4, A5, B5, Letter, Legal |
| Print Area | 210 mm x 297 mm |
| Paper Feed/Delivery Table Capacity | 500 sheets |
| Connectivity | USB |
| Weight | 25 kg |
To Next Page