To Next PageTo Next Page
Need help?Do you have a question about the Duplo DUPRINTER DP-C100 and is the answer not in the manual?
General| Paper Weight | 60 gsm to 200 gsm |
|---|---|
| Connectivity | Ethernet |
| Supported Media Types | Plain paper, Inkjet paper, Coated paper, Recycled paper |
| Media Width | 100 mm to 330 mm |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Operating Humidity | 20% to 80% RH (non-condensing) |
Explains symbols and warnings for safe operation.
Details the placement and meaning of warning labels on the machine.
Defines symbols and terms used throughout the manual.
Identifies external components of the machine.
Details the A/B control panel layout and functions.
Details the LEAGAL control panel layout and functions.
Explains the platemaking and printing workflow.
Outlines steps before starting printing.
Describes the platemaking process.
Details the final printing steps.
Instructions for loading paper into the machine.
Instructions for configuring the paper receiving area.
Steps to power up the machine.
How to verify initial machine settings.
How to place documents for scanning.
Initiating the platemaking process.
Inputting the desired copy count.
Starting the printing operation.
Selects document type for optimal scanning.
Controls the darkness of the printed plates.
Adjusts the machine's printing speed.
Fine-tunes the print alignment.
Configures zoom levels for printing.
Specific setting for 94% size reduction.
Adjusts feed pressure for different paper types.
Enables secure printing of confidential documents.
Allows printing in segments.
Connects to a computer for direct printing.
Procedure for replacing the ink cartridge.
Steps to install a new master roll.
How to replace the master ejection core.
Interprets error messages and indicators on the display.
Resolves paper jams in the feeder area.
Resolves paper jams in the delivery area.
Addresses paper stuck to the drum.
Fixes issues with master ejection.
Resolves errors during master setting.
Clears documents stuck in the ADF.
General guidance for machine operational issues.
Routine cleaning and upkeep procedures for the machine.
How to view print and platemaking counts.
Detailed technical specifications of the machine.
Guidelines for acceptable paper types for input and output.
