Duplo Duprinter DP-43E - Removing the Control Panel PCBE Type

166
z Exterior
chap.3
(3) Removing the Control Panel PCB
1) Remove the control panel.
2) Remove the 5 screws from the edit PCB. Then
remove the 2 connectors.
3) Remove the 5 screws from the mounting angle,
and remove the angle.
4) Remove the screws from the PCBs, and remove
the PCBs.
Mounting angle
Screws
Screws
Screws
Screws
Screw
Screws
Edit PCB
<<E-type>>