192
b Drum Driving Section
chap.3
b Drum Driving Section
(1)
Removing the Photointerrupter/Drum Gear
1) Remove the rear cover.
2) Loosen the set screw to remove the photointer-
rupter.
3) Remove 7 screws to take out the bracket.
4) Remove 2 screws on the photointerrupter to take
out the photointerrupter.
5) Remove the 2 mounting screws from the handle
gear, and remove the drum gear.
Mounting screws
Drum gear
Bracket
Screw
Photointerrupter
Screw
Screw
Screws
Screws
Set screw
\See page 169
Photointerrupter
Screws
To Next Page
Loading...
