318
c HELP Mode Function and Operation Procedures
chap.7
t
To stop the cutter, release the printing position adjustment
key. (Alternatively, the cutter will stop automatically when cutter
limit switch MS1 is tripped (closing its contacts)).
e
To stop the cutter, release the printing position adjustment
key. (Alternatively, the cutter will stop automatically when cutter
limit switch MS2 is tripped (closing its contacts)).
r
Press and hold down the printing position adjustment key.
The cutter motor will rotate in the reverse direction
(counterclockwise), so that the cutter moves toward the operation
side, for as long as the key is held down.
w
Press and hold down the printing position adjustment key.
The cutter motor will rotate in the regular direction (clockwise), so
that the cutter moves toward the inner side, for as long as the key
is held down.
1. Functions
(1) Function testing of cutter motor
(1) Testing the cutter motor's functioning
q
Access HELP mode H-17, and press the PRINT key.
For the basic procedure for accessing HELP modes .
2. Operation procedures
H-17
(1) Function testingHELP mode
H-17
Mode number flushes
\See page 291
y
Press the STOP key. The HELP mode selection display will
reappear.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
For desccription of operation
\See page 105
To Next Page
Loading...
