349
c HELP Mode Function and Operation Procedures
chap.7
H-47, H-48
(1) Adjustment / specification settingHELP mode
****
¡H-48(Higher-order 4 bits)
r
Press the Stop key.
t
Access HELP mode H-48 (for the higher-order 4 bits). (Refer to
qabove for procedure)
y
Use the [0] and [1] numeric keys to enter a new 4-place binary
value. See the table in wabove for 4-place binary values and the
corresponding settings.
- L -
During memorization:
i
Press the STOP key. The HELP mode selection display will
reappear.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
u
Press the [=] key. The correction amount will be memorized
in the battery PCB unit's EEPROM. During memorization, "-L-"
will be displayed.
Do not turn off the power before the "-L-" display has disappeared.
IMPORTANT
To Next Page
Loading...
