70
Chap.1 ⁄1 Option
5.
When selection of the card(s) whose print and
plate counts are to be cleared is complete,
press the PRINT SIZE key.
"PLEASE WAIT" will be appear briefly on the
screen. Then the display will return to the base
screen that was displayed in step
1
.
S
To check that the counts have been
cleared:
Select CLEAR EACH, then press the ZOOM key
to display the card number(s) that was selected,
and check that the print and plate counts are
zero.
6.
Remove the keycard from its slot.
a
a
S
To select department card No. 6 or
higher
:
Press the ZOOM key repeatedly until the
desired card number is reached.
Each press of the key scrolls the display down 1
line.
S
To delete the C (deselect the card):
Select the card again, using the ZOOM key,
then press the AUTO ZOOM key to confirm.
4.
If there is another card whose print and plate
counts you want to clear, repeat the operation
in step
3
to select it.
a
a
a
To Next Page
Loading...
