Chapter 4
44
Navigating and Entering Information in BIOS
Use the following keys to move between fields and to enter
information:
Select Screen
↑↓
Push the up and down arrow keys to move
among selections, then press Enter to make a
selection.
+ -
Change Option
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Press Esc to exit any section. If you wish to exit
the BIOS utility without saving changes, go to
the main menu, then press Esc.
Users are allowed to enter new values to replace the default settings
in certain fields, and the rest fields are specified by system default
parameters and cannot be modified by users. Reverse the attribute of
the main options and press the Enter key to enter into the submenu.
Press the Esc key to return to the previous configuration page.
To Next Page
Loading...
