Duracell DuraCharger - Installation Procedure

10
3.3. Installation Procedure
a. Basedontheproleoftheattachedmounting
template,drill3xØ6x35mmholesinthewalland
insert the wall plugs.
b. Lock the 2 x M4x32mm screws into the expansion
pipe,leavinga5mmspace,betweenthescrewhead
and the wall.
c. OpentheuppercoverofEVcharger,hangitonthe2x
M4x32mmscrews,lockitintothebottomM4x32mm
screw and then cover the sealing cap.
d. Connectwirestotheconnectors,closetheupper
cover,andlockitwith2xM4x12mmscrew.
140mm
62mm
3-Ø6
205mm 250mm