33
11. Troubleshooting
11.1. Indicator status
state Description LED Status
In standby Normal Flashing green, 1s on, 4s o
Charging status Normal Breathing green, 1s on, 1s o
Plugged In gun state Normal Breathing yellow, 1s on, 1s o
Software upgrade Normal Green light ash
Ground warning Normal Flashing yellow, 2s on, 2s o
Relay adhesion Fault Red light normally on
Input polarity reverse Fault Flashing red, 500ms on, 500ms o, 1 time, 3s o, Cycle
CP fault Fault Flashing red, 500ms on, 500ms o, 2 times, 3s o, Cycle
Leakage current fault Fault Flashing red, 500ms on, 500ms o, 3 times, 3s o, Cycle
To Next Page
Loading...
