DuraLabel BRONCO MAX - Specifications

12 | Specications GraphicProducts.com | 800-788-5572
SPECIFICATIONS
PRINT MECHANISM
• Type: Thermal Transfer
• Print Speed: up to 3" per second
• Resolution: 300 dots per inch
• Max. Print Width: 4.0"
• Max. Print Length: 120"
• Cutter: Automatic
INTERFACE
• Buttons:
Power, Supply Feed
• Communications:
USB 2.0 (USB-B), Ethernet
POWER REQUIREMENTS
• Power to Printer (from AC Adapter):
24 VDC, 6.25A
• Power to AC Adapter: 100 – 240 VAC,
50 – 60 Hz, 2.8A (max)
• Different AC adapters available for
worldwide usage
OPERATING ENVIRONMENT
• Operating Temperature:
41°F – 104°F (5°C – 40°C)
• Operation Humidity:
30% – 85%, non-condensing
• Storage Temperature:
-4°F – 122°F (-20°C – 50°C)
• Storage Humidity:
10% – 90%, non-condensing
LABEL STOCK
• Types: Continuous, Black Mark,
and Die-Cut
• Width: 0.20" minimum, 4" maximum
• Gap/Mark Height: 0.12"
• Capacity: varies by supply; external
feed available
RIBBON SUPPLY
• Width: 106 mm (4.17")
• Capacity: 360'
• Type: Wax/resin, resin
PRINTER BODY
• Dimensions:
13.5"W x 10.25"D x 8.5"H
• 12.5 lbs (5.67 kg), excluding supplies
Bronco Max specifications are subject to
change without notice.
7