Need help?Do you have a question about the DuraLabel Lobo and is the answer not in the manual?
Details the warranty coverage for defects in materials and workmanship for the printer.
Instructions for safe handling, power, environment, and battery use.
Caution regarding the sharp cutting blade and safe removal of label jams.
Instructions for properly inserting and locking a print cartridge into the printer.
Functions for opening, saving, creating new, and deleting label files and projects.
Guide to selecting barcode types, human readability, justification, and density.
Setting up sequential numbering for barcodes and labels.
Customizing default settings, auto cut modes, and print speed/darkness.
Step-by-step guide for installing the printer driver software from the CD.
Instructions for cleaning the sharp cutting blade and shear bar.
Procedures for cleaning the printhead heater line and the rubber platen roller.
Solutions for printer not powering on or responding to commands.
Resolving issues with the cartridge lock not engaging or labels not feeding.
Resolving issues with blank saved labels or wrinkled/missing ink prints.
Solutions for cartridge type mismatch errors and cutter jam messages.
General| Print Technology | Thermal Transfer |
|---|---|
| Print Resolution | 300 dpi |
| Connectivity | USB, Ethernet |
| Label Types Supported | Polyester, Polypropylene, Vinyl |
| Operating System Compatibility | Windows |
| Software Compatibility | DuraSuite |
| Print Speed | 2 inches per second |
| Label Width Range | 0.5 to 4.25 inches |
| Power Supply | 100-240 VAC, 50/60 Hz |
To Next Page
