22 | 11.1 Status Indicators
DuraLabel.com | 800.788.5572
11. Label Canvas Display
When a cartridge is loaded, and the Lobo is turned on, the display screen shows what
we call the label canvas.
The label canvas can only display one cell at a time. If a label has multiple cells, the
next cell can be accessed by using the Next Cell key. (Shift + Next Cell moves to a
previous cell.)
A label’s width (corresponding to the screen’s vertical dimension in most layouts) is
automatically based on the width of the print cartridge. Pressing Enter will move the
cursor to the next line and create a new text field. This will also automatically reduce the
size of the existing content in order to fit the label width. (This automatic field resizing
won’t occur if Font Size is set to Fixed.)
The label’s length will change based on how much content has been entered on the
label. (Automatic length resizing won’t occur if Label Length is set to Fixed.)
11.1 Status Indicators
Around the label canvas, mode there are several status indicators that give you
important information about the label project.
11.1.1 CONTENT STATUS BOX
The content status box at the top of the screen displays some key pieces of information.
The large letter in the top left of the screen indicates the type of content where the
cursor is currently located. The abbreviations are:
Display Screen
Display Screen in
label canvas mode.
The display will automatically resize to keep the label cell content on screen.
T = text IMG = image (symbol) B = barcode
S = sequence SB = sequenced barcode D = time/date
To Next Page
Loading...
