DuraLabel Lobo - Print Options

36 | 13.14 Print Options DuraLabel.com | 800.788.5572
LABEL-EDITING FUNCTION KEYS
You can change the Lobo’s internal time and date by using the Setup menu. The Setup
menu also allows you to configure the Time/Date key to place only the time or the date
(not both) onto the label canvas.
13.14 Print Options
There are three items in the Print Options menu: Mirror, Negative, and Rotate Label.
They can be toggled with the left and right arrow keys.
Mirror makes your label print as a mirror image, or “backwards.” This effect will not be
applied to the label canvas; instead, a small M in the lower right corner of the screen
will indicate that Mirror has been turned on.
Negative makes your label print in negative, or with inverted colors. For example, a
design that would normally have black text on a white background would be printed with
white text on a black background. There are some layouts that include negative cells;
these cells are displayed in black in the Layout menu.
Rotate Label allows you to rotate the label design 180 degrees for printing, or return
it to the usual 0 rotation. This option may be necessary when using a specialty supply
that has been partially pre-printed. For most labels, there will be no reason to rotate the
label, because the finished label will be the same either way. The rotation will not be
applied to the label canvas; the effect is only visible when the label is printed.
After changing any of the Print Options, you will be prompted to apply the effect to the
Entire Label or to All Labels in a multiple-label project.
Maintenance
Performed
05:07:37 PM
01/11/13
Time/Date elds can be useful for many labels
that have time-sensitive information.