DuraLabel.com | 800.788.5572
12.2 Control Screen Navigation | 25
HEADER
12. Navigation
This section will teach you how to move around the label canvas, move between labels
in a multiple-label project, and navigate the control screen menus.
12.1 Label Navigation
12.1.1 MOVING THE CURSOR BETWEEN FIELDS
To move between fields, use the up and down arrow keys, or hold the Shift key and
press the left or right arrow keys.
12.1.2 MOVING THE CURSOR INSIDE A TEXT FIELD
To move the cursor inside a text field, use the left and right arrow keys. To move to the
very end of a text field, press the End key. To move to the very beginning of a text field,
press Shift + End.
12.1.3 MOVING BETWEEN CELLS
To move to the next cell, press the Next Cell button.
To move to a previous cell, press Shift + Next Cell.
12.1.4 MOVING BETWEEN LABELS
If you are working on a project that has multiple labels, press Next Label to move to the
next label. To move to a previous label, press Shift + Next Label.
If there is not a next label, pressing the Next Label key creates a new label.
To delete an added label, press the Clear button and select Current Label.
12.2 Control Screen Navigation
Control screens and menus are accessed by pressing function keys. This section will
give you general tips for entering these control screens, moving around in them, and
making selections.
12.2.1 ENTRY AND EXIT
To enter a control screen, press one of the label function keys on the keyboard (for
example, Font Options or Sequence). To discard any changes and exit a control screen,
press that same function key again, or press the Esc key.
12.2.2 STRUCTURE
Control screens appear as lists of items; you can scroll through the items with the up
and down arrows.
To Next Page
Loading...
