28 | 13.2 Symbol
DuraLabel.com | 800.788.5572
LABEL-EDITING FUNCTION KEYS
Free Memory displays information about the Lobo’s internal storage, and the SD card
(if one is present). It shows the number of label files, the total physical memory and the
available memory.
Copy All Files gives you two options: copying all files from internal memory to the SD
card, or copying all files from the SD card to internal memory.
NOTE: If le names in one location are identical with le names in another location and
you use the Copy All Files function, the process will overwrite the identically named
les. You will be given an on-screen warning to remind you of this when copying les.
Show File List displays a list of all of the files in the selected location, and those
files’ sizes.
13.2 Symbol
Pressing the Symbol key displays a menu of symbol categories. Use the up and down
arrow keys to highlight the desired category, and press Enter to browse the symbols in
that category.
Use the arrow keys to highlight the desired symbol, and press Enter to place that symbol
onto the label canvas.
13.3 Layout
Pressing the Layout key lets you choose from several layout configurations.
The sections of a layout are called cells.
Negative-cell layouts: Some layouts have negative cells, meaning that the background
and foreground colors will be switched in those cells. In other words, if a label usually
prints out as white-on-red, then a negative cell would print out as red-on-white. The
negative cells are displayed in the Layout menu as dark cells. (There is also a Negative
setting accessed via the Print Options key that prints a negative of the current label.)
Vertical layouts: Some layouts are oriented vertically instead of horizontally. (Barcodes
cannot be positioned vertically because they would be too small to be scanned in that
orientation.) The vertical-layout labels are indicated by the perpendicular ABC/123 text.
To Next Page
Loading...
