42 | 14.1 Installing Printer Driver
DuraLabel.com | 800.788.5572
14. Printing From a Computer (optional)
NOTE: The Lobo CD & USB cord are optional accessories. If you did not receive these
items and would like them, please contact your DuraLabel representative.
You can connect a computer that runs Microsoft Windows to the Lobo to create and
print labels. To use your Lobo this way, you will need the Lobo driver software installed
on your computer.
14.1 Installing Printer Driver
The CD that comes with your Lobo includes the printer’s driver software. These steps will
walk you through the driver installation process. Administrative rights may be required to
install the driver.
1. Turn on the Lobo and connect it to your computer with a USB cord.
NOTE: Windows XP Users: If the Found New Hardware Wizard notication appears,
simply close it and continue to step 2.
2. Insert the Lobo CD into your computer’s CD/DVD drive.
To Next Page
Loading...
