DuraLabel PRO - User Manual

USER’S GUIDE
Graphic Products, Inc.
|
800.788.5572
DuraLabel.com
|
GraphicProducts.com
PRO/PRO 300

Summary

Loading the Printer

Loading Ribbon

Step-by-step guide for loading the printer ribbon correctly.

Loading Vinyl Supply

Step-by-step instructions for loading vinyl supply into the printer.

Connecting the Printer

Using a USB Cable

Detailed steps for connecting the printer using a USB cable.

Using a Parallel Cable

Configuring Printer Drivers

Continuous Vinyl Printing Instructions

Die-Cut Label Printing Instructions

Instructions for configuring the driver for die-cut labels.

B Mark Label Printing Instructions

Instructions for configuring the driver for B Mark labels.

Cutting Labels in Intervals

Label Design

Text Boxes

Graphics

Barcodes

Instructions for creating and using barcodes in label design.

Merging Information, Sequencing Labels

How to merge data from Excel and sequence labels for printing.

Cleaning and General Maintenance

Print Head

Instructions for cleaning the printer's print head to ensure print quality.

Cutter

Steps for cleaning the printer's cutting mechanism to maintain performance.

Platen Roller

Instructions on cleaning the platen roller for proper label feeding.

Troubleshooting

LED is Solid Red

Printing Suddenly Stops and LED Blinks Red

Solutions for when printing stops and the LED blinks red.

LED Quickly Blinks Red

Printing Stops while Printing Die-cut Labels and LED Blinks Red

Resolves issues with printing stopping on die-cut labels with a red LED.

After Printing a Label, Printer Dispenses Extra Supply and LED Blinks Red

Printing is not Aligned Correctly

Printing is Streaked

LED Blinks Amber and Red

Printer Cuts Labels Off-Center or into Next Label

DuraLabel PRO Specifications

General

Print Technology	Thermal Transfer
Resolution	300 dpi
Cutter	Automatic
Connectivity	USB, Ethernet
Supported Materials	Vinyl, Polyester, Polypropylene
Power Supply	100-240 VAC, 50/60 Hz
Label Width	0.5 to 4.25 inches