Page | 10
GENERAL SAFETY
The wrapper has been built in compliance with the presently valid technical rules and is reliable in operation. It has
been submitted to a final test on the functionality of components, protections, controls and emergencies. However,
dangers may still arise from this machine if it is inappropriately used by untrained personnel or if it is used for
purposes it is not intended for.
Each person instructed to operate or service the wrapper must have read the complete operating instructions before
starting to perform the respective work. This applies also if the person has already worked with a wrapping machine
of the same or a similar type, or if the person has been trained by a qualified Wulftec representative. For the
customer it is recommended to obtain a written confirmation from the personnel that the contents of these operating
instructions have been read.
Knowledge about the contents of these operating instructions is a prerequisite to protect persons against dangers as
well as avoidance of errors and safe and trouble free operation of the machine.
The operating instructions must be available and accessible to the operating and service personnel at any
time! All information in these operating instructions must be strictly observed!
In the end, the customer or the personnel authorized by him who must operate the stretch wrapping machine in
compliance with his duties is fully responsible for accident-free operation. Apart from the notes on industrial safety in
these operating instructions, the generally valid safety regulations and the instructions for the prevention of accidents
must also be complied with.
To Next Page
