Page | 31
FILM ROLL SETTINGS PAGE
Password Level 2
Controls
Functions
Edit Film Roll 1/2
Press this button to edit film roll information.
Film Roll Length
Enter the film roll length (new, unused roll).
Film Roll Weight
Enter the film roll weight (new, unused roll).
Film Gauge
Enter the film gauge (current roll).
Film Width Wrapping
Upward
This selector specifies the width of the film output from the carriage. It allows the
machine to re-adjust the calculations used for overlap and overwrap upward.
Higher film tension = Lower film width.
Distance Between PE And
Top Of The Film
Adjust in inches the distance between the autoheight photoeye and the top of the
film (measured on the load).
Film Width Wrapping
Downward
This selector specifies the width of the film output from the carriage. It allows the
machine to re-adjust the calculations used for overlap and overwrap downward.
Higher film tension = Lower film width.
To Next Page
Loading...
