DURAVIT SensoWash Slim - Page 36

36
EN
Problem Potential cause Solution Ch.
Indicator lamps and alarm function
The “Status
LED”
B
on the
unit flashes red
once each 3
seconds.
Malfunction. > Switch off
SensoWash
®
.
> Switch on
SensoWash
®
again.
If flashing does
not stop:
> Cut off power
supply.
> After 30 sec.
connect it again.
The “Status
LED”
B
on the
unit flashes
red three times
each 3 seconds.
Malfunction. > Contact
help@duravit.com
The “Status
LED”
B
on the
unit flashes red
four times each
3 seconds.
Malfunction. > Turn off “Water
temperature”
6
.
> Activate any shower
function.
6.2
A continuous
confirmation
tone is audible.
Malfunction. > Cut off the power
supply.
> After 30 sec.
connect it again.