38
EN
6. Operation
6.1 Seat unit
Switching the SensoWash
®
on/off
> Press the "Power" button
E
on the seat unit for longer than 3 seconds.
SensoWash
®
is now switched on.
The
status display
D
red lights turns off.
> Press the "Power" button
E
on the seat unit again for longer than 3 seconds.
SensoWash
®
is now switched off.
The
status display
D
does not light up.
Activating / deactivating the energy saving mode
> Press the "Power" button
E
on the seat unit for less than 2 seconds.
SensoWash
®
enters the energy saving mode.
The
status display
D
turns green.
> Press the "Power" button
E
on the seat unit again for less than 2 seconds.The
SensoWash
®
returns to the normal mode.
The
status display
D
turns red.
When the energy saving mode is activated, the seat heating is deactivated for the
next 8 hours then can then be automatically reactivated for 16 hours. This procedure
is repeated at the same time every day until the energy saving mode is deactivated.
If all SensoWash
®
functions have been inactive for 48 hours, the auto saving mode will
activate automatically. The seat heating is now inactive. When any function is used, all
To Next Page
Loading...
