DURAVIT SensoWash - Cleaning the remote control; Emptying the SensoWash (if not being used for a prolonged period or with danger of frost)

47
> Now press the "Comfortwash" button
14
on the remote control.
The spray wand cleans itself.
The spray wand is flushed with water in the concealed position.
> Press the "Stop" button
6
again and hold this pressed.
> Now press the "Comfortwash" button
14
.
The current function stops immediately.
The function is automatically terminated after 5 minutes or when the seat sensor is
activated.
Cleaning the remote control
> Only clean the remote control with a soft, damp cloth.
Emptying the SensoWash
®
(if not being used for a prolonged period or with
danger of frost)
Caution!
> Disconnect your SensoWash
®
from the power supply.
> Remove the seat unit.
> Open the 2 drain plugs.
The water in the SensoWash
®
runs through the openings.
> Screw the drain plugs back in.
> Reconnect the seat unit.