DURAVIT SensoWash - Adjusting the Night Light; Activating; Deactivating the Mute Function

44
EN
the next use.
Adjusting the night light
> Press the "Stop" button
6
and keep this pressed. Now press the "Energy saving
mode" button
5
on the remote control.
You can now set the mode of the night light.
The night light can be set individually to 3 different modes.
on > off > auto
As standard the night light is set to "auto". In this mode, the night light is automatically
switched on or off according to the ambient light.
Activating / deactivating the mute function
> Press the "Stop" button
6
and hold this pressed. Now press the "Ladywash"
button
13
on the remote control. The mute function is now activated and the
confirmation tone is deactivated.
> Press the "Stop" button
6
again and hold pressed. Now press the "Ladywash"
button
13
on the remote control. The mute function is now deactivated and the
confirmation tone is activated.