DURAVIT SensoWash - Activating; Deactivating the Energy Saving Mode; Remote Control; Opening and Closing the Seat and Lid

40
EN
6.2 Remote control
Opening and closing the seat and lid
> Press the "Open lid" button
2
on the remote control.
The lid opens, the seat remains closed.
> Press the "Open lid and seat" button
3
on the remote control.
The lid and the seat open.
> Press the "Close lid and seat" button
4
on the remote control.
The lid and the seat close.
The function is inactive when the seat sensor is activated.
Activating / deactivating the energy saving mode
> Press the "Energy saving mode" button
5
on the remote control for longer than
3 seconds.
Energy saving mode is now activated.
The status display
D
turns green.
> Press the "Energy saving mode" button
5
on the remote control for longer than
3 seconds.
Energy saving mode is now deactivated.
The status display
D
turns red.
When the energy saving mode is activated, the seat heating is deactivated for the
next 8 hours then can then be automatically reactivated for 16 hours. This procedure
is repeated at the same time every day until the energy saving mode is deactivated.