DURAVIT SensoWash - Adjusting the Spray Wand Position; Adjusting the Water Spray Intensity

42
EN
When this function is active, the spray intensity increases and decreases.
> Press the "Comfortwash" button
14
on the remote control for a third time when
the Rearwash or Ladywash function is active.
The oscillation and pulsing functions are activated.
> Press the "Comfortwash" button
14
on the remote control for a fourth time when
the Rearwash or Ladywash function is active.
The functions are now deactivated, the function that was previously set is still
active.
Adjusting the spray wand position
> Press the "Spray wand position" button
12
on the remote control.
The indicator light of the remote control illuminates.
You can now use the arrow buttons to set the suitable spray wand position.
The spray wand position can be set individually to 5 different positions.
Adjusting the water spray intensity
> Press the "Water spray intensity" button
11
on the remote control.
The indicator light of the remote control illuminates.
> Press the "+" or "-" button
9
on the remote control.
You can now set a suitable water spray intensity.
The water spray intensity can be set individually in 3 steps.
Low > Medium > High