DUROMAX MX4500E User Manual

Max Tool Customer Service
customer_service@maxtool.com
or call 1-800-629-3325 (option 3) Monday -Thursday 6am to 7pm, Friday - Saturday 6am to 3pm. PST
Product Support (Product: information, application, service info & warranty questions)
support@maxtool.com
or call 1-800-629-3325 (option 3) Monday -Thursday 6am to 7pm, Friday - Saturday 6am to 3pm. PST
Gasoline Powered Generator
Owner
’
s Manual
MX4500
MX4500E

DUROMAX MX4500E Specifications

General

Generator Type	Portable Generator
Starting Wattage	4500 Watts
Running Wattage	3500 Watts
Rated Watts	3500 Watts
Peak Watts	4500 Watts
Fuel Type	Gasoline
Fuel Tank Capacity	4 Gallons
Runtime at 50% Load	8 Hours
Starting System	Recoil Start
Frequency	60 Hz
Noise Level	69 dBA
Engine Type	4-Stroke
Displacement	208cc
Voltage	120V

Summary

General Safety Procedures

Carbon Monoxide Poisoning Hazard

Warns about the deadly, odorless gas produced by the generator and safe usage guidelines.

California Proposition 65 Chemical Warning

Informs about chemicals in exhaust known to cause cancer or reproductive harm.

Flammable Fuel Vapor Hazard

Alerts to the risk of fire or explosion from gasoline vapors and safe refueling practices.

High Voltage Electrical Shock Hazard

Details the danger of electrocution from powerful voltage and proper grounding.

Hot Surface Burn Hazard

Warns about extremely hot surfaces, especially near the exhaust, and precautions.

Generator Misuse and Damage Caution

Advises on correct usage to prevent damage and ensure longevity of the generator.

Generator Safety and Hazard Markings

Preparing Generator for First Use

Step 1: Adding Engine Oil

Provides instructions and capacity details for filling the generator's engine oil.

Step 2: Adding Gasoline

Guides on fueling the generator with fresh, unleaded gasoline.

Step 3: Grounding the Generator

Details the critical process of grounding the generator for electrical safety.

Subsequent Generator Use Procedures

Outlines checks required before each use after initial setup.

Checking Fuel Tank Level

Guidance on checking the gasoline level in the fuel tank.

Grounding Generator for Subsequent Use

Reiterates the importance and method of grounding for continued use.

Starting the Generator

Pre-Start Checks and Setup

Ensures no electrical loads are connected and the generator is properly grounded.

Fuel Valve and Choke Adjustment

Instructions for setting the fuel valve to ON and choke to CLOSED.

Recoil Starter Operation

Details the correct technique for pulling the starter cord to ignite the engine.

Post-Start Choke Adjustment

Guides on gradually opening the choke as the engine warms up.

Using the Generator

AC Power Usage

Explains how to connect AC devices based on their wattage requirements.

Estimating Device Wattage Needs

Connecting Loads to Generator

Details the process of connecting devices, respecting wattage limits and surge capacity.

Voltage Selector Switch Operation

Safe Power Cord Selection

DC Output for Battery Charging

Stopping the Generator

Disconnecting Loads and Powering Down

Cooling Down and Engine Shutoff

Generator Maintenance and Care

Cleaning Generator Exterior Surfaces

Checking Engine Oil Level

Procedure for checking the engine oil level before each use.

Adding and Changing Engine Oil

Guides on how to add oil and when to perform an oil change.

Air Cleaner Maintenance Procedure

Fuel Filter Cup Cleaning

Spark Plug Inspection and Service

Emptying the Fuel Tank for Storage

Storage and Transport Best Practices

Generator Specifications

AC Output Specifications

DC Output Specifications

Engine Performance Specifications

Troubleshooting Common Issues

Generator Assembly and Mounting

Installing Support Leg and Axle

Attaching Generator Wheels

Mounting Generator Handles