DUROMAX XP9HP - Adjustment and Torque Specifications

44
Cylinder head bolt 18 ft. lb (24 N·m)
Flywheel bolt 50 - 60 ft. lb. (70-80 N·m)
Crankcase bolt 18 ft. lb. (24 N·m)
Tie-rod bolt 9 ft. lb. (12 N·m)
Torque Value
Spark Plug Clearance .027-.031 in. (0.7-0.8 mm)
Spark Plug Type BPR6ES (NGK) RN9YC (Champion) WR7DC (Bosch)
W20EPR-U (Denso)
Valve Clearance (Cold) Intake: .006 in ± .001 in. (0.15 mm ± 0.02 mm)
Exhaust: .008 in ± .001 in. (0.20 mm ± 0.02 mm)
Carburetor Idling 1800 ± 300 rpm
Adjustment Specication
Adjustment and Torque Specications
SPECIFICATIONS (CONTINUED)
44